prikaz prve stranice dokumenta Ispitivanje korozije traka CuAlMn legure dobivene brzim hlađenjem u 0,9% NaCl otopini
  Download
PDF 19.05 MB
undergraduate thesis
Ispitivanje korozije traka CuAlMn legure dobivene brzim hlađenjem u 0,9% NaCl otopini
završni rad
2019. urn:nbn:hr:167:782740
Šmith, Silvestar
University of Split
Faculty of Chemistry and Technology
Division of Engineering and Chemistry

Cite this document

Šmith, S. (2019). Ispitivanje korozije traka CuAlMn legure dobivene brzim hlađenjem u 0,9% NaCl otopini : završni rad (Undergraduate thesis). Split: University of Split, Faculty of Chemistry and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:167:782740

Šmith, Silvestar. "Ispitivanje korozije traka CuAlMn legure dobivene brzim hlađenjem u 0,9% NaCl otopini : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:167:782740

Šmith, Silvestar. "Ispitivanje korozije traka CuAlMn legure dobivene brzim hlađenjem u 0,9% NaCl otopini : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:167:782740

Šmith, S. (2019). 'Ispitivanje korozije traka CuAlMn legure dobivene brzim hlađenjem u 0,9% NaCl otopini : završni rad', Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, accessed 20 November 2024, https://urn.nsk.hr/urn:nbn:hr:167:782740

Šmith S. Ispitivanje korozije traka CuAlMn legure dobivene brzim hlađenjem u 0,9% NaCl otopini : završni rad [Undergraduate thesis]. Split: University of Split, Faculty of Chemistry and Technology; 2019 [cited 2024 November 20] Available at: https://urn.nsk.hr/urn:nbn:hr:167:782740

S. Šmith, "Ispitivanje korozije traka CuAlMn legure dobivene brzim hlađenjem u 0,9% NaCl otopini : završni rad", Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, Split, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:167:782740

Please login to the repository to save this object to your list.
Metadata
TitleIspitivanje korozije traka CuAlMn legure dobivene brzim hlađenjem u 0,9% NaCl otopini : završni rad
Title (english)Investigation of corrosion behavior of CuAlMn alloy ribons made by rapid solidification in 0,9% NaCl solution : bachelor thesis
AuthorSilvestar Šmith
MentorLadislav Vrsalović (mentor)
MBZ: 237626
Committee memberSenka Gudić (predsjednik povjerenstva)
Committee memberSandra Svilović (član povjerenstva)
Committee memberLadislav Vrsalović (član povjerenstva)
GranterUniversity of Split
Faculty of Chemistry and Technology
(Division of Engineering and Chemistry)
Split
Defense date and country2019-09-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
U radu je provedeno ispitivanje korozijskog ponašanja traka legure CuAlMn (Al 10,4%, Mn 7,4%) koje su dobivene metodom brzog hlađenja (engl. melt spinning method) u 0,9% NaCl otopini deaeriranoj s Ar (pH = 7,4) na temperaturama od 10 o C, 24 o C, i 50 o C. Mjerenja su provedena elektrokemijskim metodama kao što su mjerenje potencijala otvorenog strujnog kruga, metodom linearne polarizacije te potenciodinamičke polarizacije. Korodirane površine elektroda pregledane su optičkim mikroskopom te je na njima provedena SEM/EDS analiza. Rezultati elektrokemijskih ispitivanja su pokazali da povišenjem temperature elektrolita dolazi do porasta gustoće korozijske struje i do smanjenja vrijednosti polarizacijskog otpora. Snimke površine optičkim i elektronskim mikroskopom nakon polarizacijskih ispitivanja pokazale su da povećanjem temperature elektrolita dolazi i do većih oštećenja površine.
Abstract (english)
Investigation of corrosion behaviour of CuAlMn alloy ribbons (Al 10.4 wt.%, Mn 7.4 wt.%) made by melt spinning methods in 0.9% NaCl solution deaerated with Ar (pH=7.4) on temperatures of 10 o C, 24 o C, 37 o C, 50 o C was performed. Measurements have been carried out by electrochemical methods such as monitoring the open circuit potential, linear polarization and potentiodynamic polarization method. The corroded surfaces of the electrode were examined by an optical microscope, and a SEM/EDS analysis was performed. The results of the electrochemical investigation have shown that elevation of the electrolytic temperature results in the increase in corrosion current density and decrease in polarization resistance values. Light and electron microscopy surface images after polarization investigation have shown that increase in electrolyte temperature results in higher surface corrosion damages.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:167:782740
ProjectNumber: 3405
Title: Dizajniranje mikrostrukture i funkcionalnih svojstava legura s prisjetljivosti oblika na bazi bakra
Acronym: DMFP-CuSMA
Leader: Mirko Gojić
Jurisdiction: Croatia
Funder: HRZZ
Study programmeTitle: Protection and Recycling of Materials
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni prvostupnik (Baccalaureus) inženjer kemijskog inženjerstva (stručni prvostupnik (Baccalaureus) inženjer kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public noteKljučne riječi doradio knjižničar/ Key words are revised by the librarian
Created on2019-10-11 09:58:35