prikaz prve stranice dokumenta Utjecaj polimernog materijala na kvalitetu trodimenzionalnog ispisa
  Download
PDF 2.65 MB
undergraduate thesis
Utjecaj polimernog materijala na kvalitetu trodimenzionalnog ispisa
završni rad
2018. urn:nbn:hr:167:763664
Čović-Stanić, Ante
University of Split
Faculty of Chemistry and Technology
Division of Engineering and Chemistry

Cite this document

Čović Stanić, A. (2018). Utjecaj polimernog materijala na kvalitetu trodimenzionalnog ispisa : završni rad (Undergraduate thesis). Split: University of Split, Faculty of Chemistry and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:167:763664

Čović Stanić, Ante. "Utjecaj polimernog materijala na kvalitetu trodimenzionalnog ispisa : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2018. https://urn.nsk.hr/urn:nbn:hr:167:763664

Čović Stanić, Ante. "Utjecaj polimernog materijala na kvalitetu trodimenzionalnog ispisa : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2018. https://urn.nsk.hr/urn:nbn:hr:167:763664

Čović Stanić, A. (2018). 'Utjecaj polimernog materijala na kvalitetu trodimenzionalnog ispisa : završni rad', Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, accessed 17 November 2024, https://urn.nsk.hr/urn:nbn:hr:167:763664

Čović Stanić A. Utjecaj polimernog materijala na kvalitetu trodimenzionalnog ispisa : završni rad [Undergraduate thesis]. Split: University of Split, Faculty of Chemistry and Technology; 2018 [cited 2024 November 17] Available at: https://urn.nsk.hr/urn:nbn:hr:167:763664

A. Čović Stanić, "Utjecaj polimernog materijala na kvalitetu trodimenzionalnog ispisa : završni rad", Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, Split, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:167:763664

Please login to the repository to save this object to your list.
Metadata
TitleUtjecaj polimernog materijala na kvalitetu trodimenzionalnog ispisa : završni rad
Title (english)Effect of polymeric material on 3D print quality : bachelor thesis
AuthorAnte Čović-Stanić
MentorNataša Stipanelov-Vrandečić (mentor)
MBZ: 226264
Committee memberMatko Erceg (predsjednik povjerenstva)
Committee memberPero Dabić (član povjerenstva)
Committee memberNataša Stipanelov-Vrandečić (član povjerenstva)
GranterUniversity of Split
Faculty of Chemistry and Technology
(Division of Engineering and Chemistry)
Split
Defense date and country2018, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Abstract
Napredna tehnika koja omogućava stvaranje čvrstih predmeta iz digitalnog zapisa je tehnika trodimenzionalnog ispisa. Ta tehnika osim što uvelike može olakšati svakodnevni život, može postići veliku preciznost i geometrijsku točnost zadanih proporcija. Kod svake nove tehnike, tako i kod ove, težnja je smisliti procedure gdje će proizvodi imati veliku kvalitetu a troškovi procesa biti što manji. Upravo je to cilj ovog završnog rada: ispitati kvalitetu trodimenzionalnog ispisa za različite polimerne materijale (polilaktid-PLA, akrilonitril/butadien/stiren-ABS, kopoliester-CPE). Kvaliteta ispisa se temelji na ispitivanju vodonepropusnosti pri različitim brzinama ispisa (0,06; 0,10 i 0,20 mm 3 /s). Korišten je 3D pisač Ultimaker 3. Svi ispitivani materijali podvrgnuti su termogravimetrijskoj analizi (TGA) i diferencijalnoj pretražnoj kalorimetriji (DSC) kako bi se odredila toplinska svojstva samih polimera. Nakon ispisa, površina je promatrana polarizacijskim mikroskopom. Temeljem ispitivanih parametara utvrđeno je da je kopoliester najkvalitetniji materijal za trodimenzionalni ispis.
Abstract (english)
Advanced technique that allows for the creation of solid materials from digital writing is the technique of three-dimensional printing. Besides from great simplification of everyday life, this technique can accomplish great precision and geometrical accuracy of designated proportions. As with every new technique, the aim of this one is to develop procedures that will ensure manufacture of high quality products and reduction of the production costs. The main goal of this bachelor thesis is, therefore, the analysis of the quality of three-dimensional printing of various polymeric materials (PLA, ABS, CPE). The quality of printing is based on the watertightness analysis at various speeds of printing (0,06, 0,10, 0,20 mm 3 /s). The 3D printing machine that has been used is Ultimaker 3. All of the analyzed polymeric materials have been submitted to thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in order to determine the thermal characteristics of the polymer. After printing, the surface has been examined under the polarizing microscope. On the basis of the observed, it is concluded that copolyester has the best quality for 3D printing.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:167:763664
Study programmeTitle: Chemistry
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) kemije (sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) kemije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public noteKljučne riječi doradio knjižničar/ Key words are revised by the librarian
Created on2019-06-13 10:17:40