prikaz prve stranice dokumenta Izrada elektrode i provedba konduktometrijskih mjerenja u cementnim pastama uz dodatak mljevene opeke
  Download
PDF 1.18 MB
undergraduate thesis
Izrada elektrode i provedba konduktometrijskih mjerenja u cementnim pastama uz dodatak mljevene opeke
završni rad
2019. urn:nbn:hr:167:594784
Barbarić, Sara
University of Split
Faculty of Chemistry and Technology
Division of Engineering and Chemistry

Cite this document

Barbarić, S. (2019). Izrada elektrode i provedba konduktometrijskih mjerenja u cementnim pastama uz dodatak mljevene opeke : završni rad (Undergraduate thesis). Split: University of Split, Faculty of Chemistry and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:167:594784

Barbarić, Sara. "Izrada elektrode i provedba konduktometrijskih mjerenja u cementnim pastama uz dodatak mljevene opeke : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:167:594784

Barbarić, Sara. "Izrada elektrode i provedba konduktometrijskih mjerenja u cementnim pastama uz dodatak mljevene opeke : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:167:594784

Barbarić, S. (2019). 'Izrada elektrode i provedba konduktometrijskih mjerenja u cementnim pastama uz dodatak mljevene opeke : završni rad', Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, accessed 29 December 2024, https://urn.nsk.hr/urn:nbn:hr:167:594784

Barbarić S. Izrada elektrode i provedba konduktometrijskih mjerenja u cementnim pastama uz dodatak mljevene opeke : završni rad [Undergraduate thesis]. Split: University of Split, Faculty of Chemistry and Technology; 2019 [cited 2024 December 29] Available at: https://urn.nsk.hr/urn:nbn:hr:167:594784

S. Barbarić, "Izrada elektrode i provedba konduktometrijskih mjerenja u cementnim pastama uz dodatak mljevene opeke : završni rad", Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, Split, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:167:594784

Please login to the repository to save this object to your list.
Metadata
TitleIzrada elektrode i provedba konduktometrijskih mjerenja u cementnim pastama uz dodatak mljevene opeke : završni rad
Title (english)Electrode preparation and conductometric measurements in cement paste with the addition of ground brick : bachelor thesis
AuthorSara Barbarić
MentorPero Dabić (mentor)
MBZ: 181084
Committee memberMiroslav Labor (predsjednik povjerenstva)
Committee memberDamir Barbir (član povjerenstva)
Committee memberPero Dabić (član povjerenstva)
GranterUniversity of Split
Faculty of Chemistry and Technology
(Division of Engineering and Chemistry)
Split
Defense date and country2019-10-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
Za provedbu konduktometrijskih mjerenja u cementnim pastama potrebno je izraditi elektrodu otpornu na visoke pH vrijednosti te dobrih mehaničkih svojstava. Cementna pasta nakon početka vezanja otvrdnjava i prelazi u cementni kamen iz kojeg treba osloboditi neoštećenu elektrodu. Prikladan materijal je elektroda s pločicama od nehrđajućeg čelika s tvrdim polimernim tijelom ispunjenim epoksidnom smolom. Izrađenoj elektrodi potrebno je odrediti konstantu. Izvršeno je kontinuirano mjerenje specifične električne provodnosti cementnih pasti pripravljenih od CEM I uz dodatak 0 - 30 mas.% mljevene građevinske opeke. Mjerenja su provedena pri 20 °C i V/K = 0,5, a vrijednosti specifične električne provodnosti digitalno su očitavani i pohranjivani u memoriju računala svakih 5 minuta do pojave maksimalne provodnosti. Utvrđeno je da povećani dodatak mljevene opeke smanjuje vrijednosti specifične električne provodnosti te odgađa početak vezanja cementnih pasti jer se maksimalna električna provodnost događa kasnije.
Abstract (english)
For execution of conductometric measurements in cement paste, it is necessary to produce an electrode resistant to high pH values and good mechanical properties. The cement paste hardens after the beginning of binding and passes into the cement stone from which the undamaged electrode is to be released. A suitable material is a stainless steel tile electrode with a rigid polymer body filled with epoxy resin. It is necessary to determine a constant for the fabricated electrode. Continuous measurement of the specific electrical conductivity of cement paste prepared by CEM was carried out with the addition of 0 - 30 wt.% of ground brick. Measurements were taken at 20 °C and V/S = 0.5, and the values of the specific electrical conductivity were digitally read and stored in the computer's memory every 5 minutes until enhanced maximum conductances. Increasing the addition of ground brick has been found to reduce the values of specific electrical conductivity and delay the beginning of cement paste bonding since the maximum electrical conductivity occurs later.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:167:594784
Study programmeTitle: Chemical Technology; specializations in: Chemical Engineering, Environmental Protection
Course: Chemical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka kemijskog inženjerstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-01-13 12:15:30